Here’s the third in my series of noise making experiments with the Roland MKS-80. This time I decided to drop the recording into one of my Live sets and run it through my chain of master effects. This includes a filter, bit reduction, delay and reverb. I have most of the parameters for these effects MIDI mapped, giving me instant access to them via nine knobs on my Korg nanoKONTROL. This gave me the ability to further deconstruct the already destructed chaos that I started with.
Here’s another segment from the noise experiments I produced using the Roland MKS-80. I’m enjoying the sound of the triangle wav setting on the LFO that you can hear at the end.
I have been recording a series of solo noise jams using the Roland Super Jupiter MKS-80 while in the process of researching repairs. The unit currently cannot be tuned and does not respond to keyboard velocity information. This does not prevent me from exploring what the instrument can do sonically, without depending on traditional scales, or harmony. This sort of experimentation is usually done with modular synthesizers, or instruments that have most of the parameters available as tactile controls. In other words, to do this on an MKS-80 you need the MPG-80 programmer, or a viable alternative.
As far as physical controllers go, the CME Bitstream 3X seems to be one that a lot of MKS-80 users are talking about. It looks like a pretty good controller for a lot of things, but once again, it’s a little on the expensive side of things. I opted to use the reKon editor as a plugin and map MIDI controls to it as I described in reKon Audio VST-AU MKS-80 Editor. This worked great, with no noticeable latency. Here’s a segment from the first experiment in this series.
If you know anything about the Roland Super Jupiter MKS-80 you know that it’s glacially slow to program the beast without using the Roland MPG-80 programmer. That’s all well and good, but the MPG-80s are pretty hard to come by and if you do find one you might have to sell a kidney to pay for it.
That’s where the reKon Audio VST-AU MKS-80 editor comes in. It’s a software editor for Mac and Windows that has an interface modeled after the MPG-80. It’s got all the real-time controls that the MPG-80 has, plus a patch librarian, randomizer, and more. What I have found most useful is the ability to run it as a plugin.
In Ableton Live I was able to save the patch data with the set. I also mapped many of the controls in the editor to sliders and knobs on a MIDI controller. In the process of setting this up, I thought that there would surely be noticeable latency going from the MIDI controller to the reKon plugin, then to the MIDI out, and back into the MKS-80, but it was fast and fluid. I did notice some minor aliasing when sweeping the filter, but I got the same result when I made the adjustments directly on the MKS-80.
Here’s a mono lead sound that I programmed using this technique. Please pardon the self indulgent playing, but I’m pretty pleased with this patch and it was a breeze to program with the reKon plugin. I’m also impressed with the quality of the MKS-80 VCOs over a broad frequency range. With sampled and modeled waveforms you often end up hearing artifacts or undertones in the high frequencies. Not so with this beast.
I isolated this string sound from my Ostraka set tonight at Short Circuit, “a monthly show set up to show case local and out of state electronic music artists” – from the Short Circuit Facebook Page. Tonight the line-up included WEb DiMension, Sputnik Viper, Square Wail, and Ostraka.
