Auto Octave Filter Sweep

Here’s a test composition using another patch I created for Curve titled Auto Octave Filter Sweep by AudioCookbook. On this patch I used two of the LFOs. The first one I setup to alternate between the octaves with a square wave, and the second I used with a sign wave to modulate the cutoff frequency on the filter configured with a 24dB low pass filter. On the second LFO I used the fixed rate that ranges from 0.020 hertz all the way up to 5.24 kilohertz. I mapped a MIDI controller to the LFO speed and adjusted it over the full range during the sequence. I also made adjustment to the cutoff frequency, resonance, and envelopes during the 5:20 minute recording.

Auto Octave Filter Sweep

Sequence Made with Curve Shared Preset Synthesizer

Cableguys.de have recently released an excellent community-driven software synthesizer called Curve (downloadable demo available). The synth has three, aliasing-free oscillators, three five stage envelopes, two filters each with ten modes, and four LFOs that are either, beat, note, or frequency synced. One of the coolest things you can do is draw your waveforms in the editor. You can even randomize them for some interesting results. Here’s a sequence that I created and recorded without any processing using Curve. This is one of my first attempts at creating a patch in Curve and I shared it to the preset community (available within Curve’s interface) as Bouncy Arpeggiator by AudioCookbook. Stay tuned for a lot more from this powerful and great sounding software synth.

Cables Guys Curve Sequence

Ableton Live Arpeggiating Analog Polysynth

Today’s One Synthesizer Sound Every Day involves using the arpeggiator built into Ableton Live. The arpeggiator, found under MIDI Effects, is a pretty simple tool, there are the usual up, down, up/down patterns as well as random, random once (repeats a random pattern), and random other (doesn’t play the same note twice).

This one minute and fifty second microtrack is composed of two layers of arpeggios created by routing Ableton’s arpeggiator to my newly restored Roland Juno-106. I added some filtered tempo delay and mixed in some reverb on the fade out to polish it off. I wish I had a piece of hardware that did exactly what Ableton’s Arpeggiator does (perhaps with the addition of a tap tempo button). In fact I started a discussion about this on the Electronic Musicians Network, a Facebook group started by my friend Robert Luna. Friend me, then message me there if you’d like to participate in the group. I’ll write an article soon compiling my research into dedicated hardware arpeggiators and hardware sequencers. Here are the arpeggios combined.

Two Layered Arp at 114 BPM

Roland D50 Microtrack No. 1

As part of my One Synthesizer Sound Every Day project I am producing a series of microtracks inspired by the textures of factory presets or custom patches, found or discovered within a variety of electronic instruments. Today I’m presenting the first of these microtracks that I produced using my Roland D-50. I have had this synth since it was new. Yes, the one with the custom, spray painted, yellow stripes on it. Back then I had to have my father co-sign a loan for me to afford it. Although it was impossible to sample with it, the D-50 had a huge variety of sounds possible at the time using the built in 8-bit PCM sample library combined with Linear Arithmatic Synthesis or LAS.

I lost interest in the D-50 to analog, sampling, and modeling instruments for almost a decade, rarely bringing it out to use as a controller, or for an FX patch here and there. After seeing Roy Ayers keyboard player using one recently, I’m rediscovering the instrument as well as enjoying the nostalgia of hearing it again. One thing I don’t miss about it is how time consuming it is to program your own patches. Without the PG-1000 (BTW: I’m looking for one of these) it is a very tedious process, although it does have a joystick to modify selected values.

Fortunately the wealth of presets available for the D-50 still makes it a desirable instrument. To create this track I used the “Clock Factory” preset to produce a percussive loop. I can’t claim this composition as my own, since I’m simply playing a key and using aftertouch to alter the pitch, but it’s fun to appreciate the evolving patches that the Roland engineers managed to come up with.

Clock Factory

An Exclusive Holiday Gift from Ostraka

Here’s a set I recorded live to Ableton during a performance at Nick and Eddie Thursday Funhouse hosted by Jon Davis, December 16, 2010. This is all new material that I’ve been working on, except for the last track, which is a remix of Illuminator Console from Precambrian Resonance (Unearthed Music 2009). Here’s the download link for the 37:28 minute set hosted on Unearthed Music. Expect to hear lots of Grain Machine, as well as synth sounds from the Casio CZ-1000, the Korg MS2000, the Roland D-50, my Sequential Circuits Pro-One, some old Hammond rhythm programs, and even a little bit of Rhodes electric piano.

Download Live Ostraka Set at Nick and Eddie Thursday Funhouse (89.9 MB)