iPad only Track with Samplr, iSEM, Figure, QuNexus

771a46346fa411e3816f0eceecffb26d_8

I started this track on the plane during a recent trip to Seattle, Washington. Being away from my studio for a few days, I brought along my iPad and QuNexus to produce a few tracks while traveling. I decided to use Samplr as the foundation for this piece because I enjoy its simplicity and intuitive interface. It also offers a unique way to work in contrast to mobile DAWs that are usually analogues of their PC based counterparts.

I started out by experimenting with the kora samples included with one of the Samplr demos, arpeggiating and processing them in different ways. The rest of the sounds were produced with Propellerhead Figure and iSEM from Arturia that I played with the QuNexus. Once I had the tracks organized I performed the mix in Samplr while capturing the results in AudioShare.

Rule Based Electronic Music: Good Morning Mr. Paik

Screen Shot 2013-12-19 at 11.25.48 PM

For the sixth piece in the series I left out the percussive layers. This was also a test for the MIDI output mod that I recently applied to the Volca Keys. The setup included the Volca Keys MIDI output (mod) going to the MIDI input of the Novation Bass Station II. To sync the Monotribe I ran the sync out from the Volca Keys to the Monotribe. This can be problematic because there’s some crosstalk between the audio and sync out ports on the Volcas. Keeping the level of the Volca Keys just under full prevents stuttering on the Monotribe, but I’d like to find a better solution.

I also followed these rules: 1) No overdubbing. All tracks were recorded at the same time. 2) No computer sequencing. All sequencing was on the instruments used. 3) No looping or shuffling parts in post. Editing for length and content was allowed. 4) One reverb send, one delay, and fades were allowed. No other processing. 5) No mix tricks in post. Reverse and rolls were performed live.

Rule Based Electronic Music: Another Scientific Toy

fcd529e8ac4011e19e4a12313813ffc0_7

On this fifth piece within the series the lead was played on the Volca Keys using a MIDI controller allowing for spanning several octaves and applying pitch bend and velocity. To get the intermittent pitch modulation I adjusted the LFO amount during play. Other instruments included the DSI Tempest and Novation Bass Station II.

I also followed these rules: 1) No overdubbing. All tracks were recorded at the same time. 2) No computer sequencing. All sequencing was on the instruments used. 3) No looping or shuffling parts in post. Editing for length and content was allowed. 4) One reverb send, one delay, and fades were allowed. No other processing. 5) No mix tricks in post. Reverse and rolls were performed live.

Rule Based Electronic Music: REPL

314314main_image_1289_640

This is the forth piece in a series of rule based electronic compositions. I used the DSI Tempest, Korg Volca Keys, Novation Bass Station II, and Memory Man Delay. I also followed these rules: 1) No overdubbing. All tracks were recorded at the same time. 2) No computer sequencing. All sequencing was on the instruments used. 3) No looping or shuffling parts in post. Editing for length and content was allowed. 4) One reverb send, one delay, and fades were allowed. No other processing. 5) No mix tricks in post. Reverse and rolls were performed live.

Rule Based Electronic Music: Upsilon Andromedae

ua

Here’s another piece using the DSI Tempest, Korg Volca Keys (this time not running through the Monotribe), Novation Bass Station II, and Memory Man Delay. I also made slight modifications to the rules: 1) No overdubbing. All tracks were recorded at the same time. 2) No computer sequencing. All sequencing was on the instruments used. 3) No looping or shuffling parts in post. Editing for length and content was allowed. 4) One reverb send, one delay, and fades were allowed. No other processing. 5) No mix tricks in post. Reverse and rolls were performed live.