Moog Sub 37 1.10 Firmware Demo

Yesterday I got a note from Moog that the long anticipated 1.10 firmware for the Moog Sub 37, announced in January at NAMM, was now available. Today I scheduled time in my studio to install it and test out some of the new features. This release is significant because the bulk of the updates are new features! In this video I demonstrate step edit mode and quick mapping of modulation destinations.

Each of the sixteen preset buttons can now be used to turn on and off steps while playing a sequence. One problem I found is that you can only turn on or off one step at a time. I imagine this is something that they’ll fix because we do have ten fingers after all. [UPDATE: Pressing two steps at a time is for turning on/off ties.] Other than that it works beautifully! If your sequence is longer than 16 steps the buttons jump to the second, third, and fourth pages automatically as the sequence is playing.

The quick mapping of modulation destinations is a treat. Simply hold down the MOD 1 or MOD 2 DEST button while turning a parameter. I do this in the video at 0:47 applying MOD 1 to OSC 2 frequency. You can also press a button. For example to modulate the filter slope setting press SLOPE while holding one of the MOD buttons. This works for the octave switch knob, pattern switch, pattern range buttons, and so on. Here’s a list of all the new features:

  • Step Edit Mode – Allows visual display and editing of individual sequence steps on preset buttons 1-16, with easy real-time control over rests, ties, and more.
  • Quick Mapping of Programmable Mod Destinations – Simply hold the Mod (1/2) Dest button and turn a parameter knob to assign modulation to that parameter.
  • Skip and Ratchet Steps – Sequences can now include Skipped steps (which can be toggled On and Off on-the-fly) and Ratchet steps (1 to 8 repeats per step).
  • Arpeggiator and Sequencer Swing Control – Adjust the ratio of on-beat vs. off-beat duration from 0% to 100%. Swing can also apply to Synced LFOs.
  • Sequencer Mod Destination – Sequence any one parameter directly, using the per-step Sequence Mod Value (mod wheel position is recorded per-step).
  • Sequencer Mod Only – Use the sequencer purely as a sequenced modulation-generator, without playing a sequence of notes (the keyboard plays normally).
  • CV Mapping – Use the external Pitch CV, Volume CV, and KB Gate inputs to control almost any parameter on the Sub 37. Step Advance and Step1 Reset functions allow you to clock the Sub 37 sequencer using analog gate/trigger signals, and the Gate input can now function as a Sustain pedal input.
  • Variance – Use this parameter to specify a subtle amount of random detuning to the oscillators. (For when perfect tuning is too perfect)

Leave a Reply